Agtrans Mercedes Hiab truck lifting a cabin on a Taranaki site

Hiab hireTaranaki & Whanganui

Hiab hire across Taranaki and Whanganui: Palfinger truck-mounted cranes that pick it up, carry it and set it down in one trip. Based in Hāwera and New Plymouth.

One truck.
One trip.

A Hiab is often the cheaper way when the load needs lifting at both ends. No separate crane, no separate truck.

  • Shipping containers
  • Small buildings & tiny homes
  • Precast & tilt panels
  • Machinery & plant
  • Bulk materials to farm
  • Power, utilities & telco gear
  • Wellsite equipment & portacoms
  • Pipe, casing & rods

Working beyond Taranaki? Our tracked crane travels the North Island for power pole and cell tower work.

Agtrans Hiab truck at a power pole with Mt Taranaki and the sun behind

Our Hiab
hire fleet

Palfinger cranes from 14.4 m to 32 m reach, on trucks that tow flat-top trailers, semis, trombones and step decks.

Agtrans Palfinger 53002 – rear mount Palfinger Hiab truck, based in New Plymouth, Taranaki

Palfinger 53002 – rear mount

Based in New Plymouth

Rear-mounted on a Mercedes 10×4 rigid truck, towing a four-axle flat-top trailer.

Lifts
2 t @ 19 m
With fly jib
31 m reach
Agtrans Palfinger 53002 – front mount Palfinger Hiab truck, based in Hāwera, Taranaki

Palfinger 53002 – front mount

Based in Hāwera

Front-mounted on a Mercedes 8×4 tractor unit. Tows a 13.2 m semi-trailer or an 21 m trombone trailer.

Lifts
2 t @ 19 m
With fly jib
27 m reach
Agtrans Palfinger 65002 Palfinger Hiab truck, based in Hāwera, Taranaki

Palfinger 65002

Based in Hāwera

Front-mounted on an 8×4 tractor unit. Tows a 13.2 m semi, an 21 m trombone trailer or a low-bed step deck.

Lifts
2.5 t @ 18 m
With fly jib
32 m reach
Agtrans Palfinger 40002 Palfinger Hiab truck, based in Hāwera, Taranaki

Palfinger 40002

Based in Hāwera

Hino 8×4 with a rear-mounted crane, towing a four-axle flat-top trailer.

Lifts
8 t @ 4.5 m
Max boom
19 m
Agtrans Palfinger 17.001 Palfinger Hiab truck, based in Hāwera, Taranaki

Palfinger 17.001

Based in Hāwera

Mercedes 8×4 with a rear-mounted crane and trailer gear. Takes an auger attachment.

Lifts
3.5 t @ 4 m
Max boom
14.4 m
Augers
300, 600, 900, 1200 mm · holes to 3.5 m

Holes drilled.
Posts placed.

The Palfinger 17.001 takes an auger attachment: 300, 600, 900 and 1200 mm augers, with holes up to 3.5 m deep. Drill, then lift the pole or pile in with the same truck.

Ask about auger work
Agtrans Palfinger 17.001 Hiab truck with a hydraulic auger raised over a spoil heap after drilling a hole in a paddock
Palfinger 17.001 with the auger attachment, drilling in a paddock. Pole work beyond Taranaki? See the tracked crane.
Agtrans Mercedes Hiab truck with its Palfinger crane on a Taranaki site

Lift it and
deliver it.

Tell us what it is and where it's going.

Scroll to Top